คำสั่ง DOS ในการเช็คNETWORK

> ipconfig ... Show information.
> ipconfig /all ... Show detailed information
> ipconfig /renew ... renew all adapaters
> ipconfig /renew EL* ... renew adapters named EL....
> ipconfig /release *ELINK?21* ... release all matching adapters,
eg. ELINK-21, myELELINKi21adapter.
Options
/? Display this help message.
/all Display full configuration information.
/release Release the IP address for the specified adapter.
/renew Renew the IP address for the specified adapter.
/flushdns Purges the DNS Resolver cache.
/registerdns Refreshes all DHCP leases and re-registers DNS names
/displaydns Display the contents of the DNS Resolver Cache.
/showclassid Displays all the dhcp class IDs allowed for adapter.
/setclassid Modifies the dhcp class id.


แค่นี้ก็พอมั้ง

มี ping [ip or name]
มี tracert [ip] ไว้ trace ว่าถ้าจะติดต่อไป ip ดังกล่าว จะผ่าน gateway หรือ router ใดบ้าง
มี finger
Displays information about a user on a specified system running the
Finger service. Output varies based on the remote system.

FINGER [-l] [user]@host [...]

มี netstat ตัวนี้คล้ายกับ netstat บนลีนุก
Displays protocol statistics and current TCP/IP network connections.

NETSTAT [-a] [-e] [-n] [-s] [-p proto] [-r] [interval]

-a Displays all connections and listening ports.
-e Displays Ethernet statistics. This may be combined with the -s
option.
-n Displays addresses and port numbers in numerical form.
-p proto Shows connections for the protocol specified by proto; proto
may be TCP or UDP. If used with the -s option to display
per-protocol statistics, proto may be TCP, UDP, or IP.
-r Displays the routing table.
-s Displays per-protocol statistics. By default, statistics are
shown for TCP, UDP and IP; the -p option may be used to specify
a subset of the default.
interval Redisplays selected statistics, pausing interval seconds
between each display. Press CTRL+C to stop redisplaying
statistics. If omitted, netstat will print the current
configuration information once.

มี arp อันนี้เผื่ออยากรู้ว่าเครื่อง ip นั้นๆมี MAC-Address อะไร
Displays and modifies the IP-to-Physical address translation tables used by
address resolution protocol (ARP).

ARP -s inet_addr eth_addr [if_addr]
ARP -d inet_addr [if_addr]
ARP -a [inet_addr] [-N if_addr]

-a Displays current ARP entries by interrogating the current
protocol data. If inet_addr is specified, the IP and Physical
addresses for only the specified computer are displayed. If
more than one network interface uses ARP, entries for each ARP
table are displayed.
-g Same as -a.
inet_addr Specifies an internet address.
-N if_addr Displays the ARP entries for the network interface specified
by if_addr.
-d Deletes the host specified by inet_addr. inet_addr may be
wildcarded with * to delete all hosts.
-s Adds the host and associates the Internet address inet_addr
with the Physical address eth_addr. The Physical address is
given as 6 hexadecimal bytes separated by hyphens. The entry
is permanent.
eth_addr Specifies a physical address.
if_addr If present, this specifies the Internet address of the
interface whose address translation table should be modified.
If not present, the first applicable interface will be used.
Example:
> arp -s 157.55.85.212 00-aa-00-62-c6-09 .... Adds a static entry.
> arp -a .... Displays the arp table.


แค่นี้ก่อง

เมื่อ: 11 ธันวาคม 2006, 14:33:14
--------------------------------------------------------------------------------
telnet ,ftp

พื้นฐานงะ สำหรับพวกนี้สำหรับ client ติดต่อ ไป server นะ
สำหรับ server ไม่รู้คำสั่งบน dos เหมือนกัน
รู้แต่ต้องลง IIS แล้วเซ็ทเอาจาก control panel
ถึงจะรันพวก telnet server ,ftp server ได้หรือไม่ก็ใช้โปรแกรมเสริมที่ต้องโหลดเอง

TAICOM (TG 200-GT)

TAICOM ( TG 200-GT)











ติดต่อผ่าน Serial port ของเครื่อง
คอมพิวเตอร์ใช้โปรแกรม Hyper terminalเชื่อมกับ Control port ของอุปกรณ์นั้นโดยใช้ property port ดังนี้ 38400 / 8 / none /1 / none / Emulation ด้วย VT 100 ใช้สายต่อแบบ Through Cable
( 2 wire คู่ 1,2 RJ-45 ) password : admin

G.703 to G.703
****************************LOCAL_SITE*************REMOTE_SITE
Config System

Device Type ************STU-C********************* STU-R

Clock Source ************E1/T1********************* Recovery

Interface

E1/T1****************** Type E1******************** Type E1

Data rate *************2048 Kbps ****************rate 2048 Kbps

Frame *****************UnFrame******************** UnFrame

Data port

Data rate*************** 0 Kbps *********************0 Kbps

SAVE

G.703 to V.35 (Fraction)

Config System

Device Type ************STU-C*********************STU-R

Clock Source************ E1/T1******************** Recovery

Interface

E1/T1****************** Type E1 ********************Type E1

Data rate **************X Kbps*********************** 0 Kbps

Frame****************** PCM31C ******************PCM31C

CRC *******************Generate****************** Passthrough

Data port

Type *********************v.35 ****************************v.35

Data rate **************0 Kbps ************************X Kbps

DTR/RTS*************** on *****************************normal

Tx timing source *******TT******************************** ST

*X = จำนวน time slot ที่เลือกใช้งาน

SAVE

V.35 to v.35

Config System

Device Type ***************STU-C ***********STU-R

Clock Source ************Data port **********Recovery

Interface

E1/T1**************** Type E1 ************Type E1

Data rate ************0 Kbps ************* 0 Kbps

Frame*************** UnFrame*********** UnFrame

Data port

Type***************** v.35***************** v.35

Data rate **********X Kbps **************X Kbps

DTR/RTS************ on *****************normal

Tx timing source ******TT ******************ST

SAVE
*X = จำนวน time slot ที่เลือกใช้งาน

FOM LOGSYS

อุปกรณ์ FIBER OPTIC MODEM ( FOM ) ซึ่งประกอบด้วยผลิตภัณฑ์
1 LOGSYS Setup hardware by key pad ด้านหน้า ( 2 Core )

- LOG 4000 F( E1)
- LOG 4000 E( E1+V.35)
- LOG 4000 FOM 4( E1+V.35)

G.703 to G.703
System config *************COT************************ RT
Channel config
Channel X active*********** YES************************ YES
Trunk X *******************E1************************** E1
Channel X code************* HDB3 *********************HDB3

E1 to V.35 (Fraction)
System config **************COT************************ RT
Channel config
Channel X active************ YES ************************YES
Trunk X *******************E1 **************************E1/V.35
Refer clk X***************** Ext *************************Loop
CH X Frame ****************CCS************************* CCS
CH X TS 16 *****************DATA*********************** DATA
DTE config
CH X – TT ***********************************************Loop 2
CH X – Type *********************************************64 N
CH X – Count ********************************************Y CH Select

V.35 to V.35
System config **************************COT*************************** RT
Channel config
Channel X active ***********************YES ***************************YES
Trunk X ********************************E1/V.35 ***********************E1/V.35
Refer clk X**************************** Ext ******************************Loop
CH X Frame************************** CCS ****************************CCS
CH X TS 16 *************************DATA ****************************DATA
DTE config
CH X – *****************************TT Loop 2********************** Loop 2
CH X – Type************************* 64 N *****************************64 N
CH X – Count************************ Y CH Select***************** Y CH Select
*X = Channel ที่เลือกใช้งาน
Y = จำนวน time slot ที่เลือกใช้งาน

Wirring Port Alcatel 3600 MainStreet

การ Wirring Port Alcatel 3600 MainStreet Card LC27,LC28,GSLC-12

Line-----PIN(CHAMP 50 PIN)------Coulor-----PIN(CHAMP 50 PIN)-----Coulor
1---------------1-----------------------------ขาว---------26----------------------------น้ำเงิน
2---------------3-----------------------------ขาว---------28----------------------------ส้ม
3---------------5-----------------------------ขาว---------30----------------------------เขียว
4---------------7-----------------------------ขาว---------32----------------------------น้ำตาล
5---------------9-----------------------------ขาว---------34----------------------------เทา
6---------------11---------------------------แดง---------36----------------------------น้ำเงิน
7---------------13---------------------------แดง---------38----------------------------ส้ม
8---------------15---------------------------แดง---------40----------------------------เขียว
9---------------17---------------------------แดง---------42----------------------------น้ำตาล
10-------------19---------------------------แดง---------44----------------------------เทา
11-------------21---------------------------ดำ-----------46----------------------------น้ำเงิน
12-------------23---------------------------ดำ-----------48----------------------------ส้ม

หมายเหตุ กรณี Card มี Line ไม่ถึง 12 ก็ให้ Wirring ตามจำนวน Line

การทำ LOOP V.35

ใช้ในการตรวจเช็คสัญาณ MODEM Broad band ใช้ interface V.35
C-------------------D
E-------------------H
P-------------------R
S-------------------T
U------------------V
W------------------X

การWirring สาย V.35 Alcactel_2753,2801 MainStreet เข้า Router Vanguard 6520

สาย ROUTER ----------> DSU ALCATEL ใช้กับ ROUTER Vanguard 6520 (ธกส.)

V.35--------------Signal------------ DSU_ALCATEL------------ ROUTER DB25 (25PIN)

B----------------- GND--------------17-------------------------------- 7

F------------------ DCD-------------- 8--------------------------------- 8
L------------------ LL---------------- 18--------------------------------- -
R------------------ RXDA------------ 2--------------------------------- 3
V------------------ SCRA ----------16--------------------------------17
D----------------- CTS--------------- 5--------------------------------- 5
J------------------ RI---------------- 22--------------------------------- -
T----------------- RXDB----------- 15-------------------------------- 16
X----------------- SCRB------------ 3-------------------------------- 18
A----------------- FGND---------- 13 ---------------------------------1
E----------------- DSR-------------- 6----------------------------------6
K----------------- ALB------------- 25--------------------------------- -
P----------------- TXDA----------- 19--------------------------------- 2
U----------------- XCLKA ---------11------------------------------- 24
Y---------------- SCTA ------------14------------------------------- 15
C---------------- RTS---------------- 4--------------------------------- 4
H---------------- DTR--------------- 20------------------------------- 20
S---------------- TXDB-------------- 7 --------------------------------14
W-------------- XCLKB------------ 24-------------------------------- 22
AA------------- SCTB ---------------1---------------------------------21

สาย ROUTER ----------> DSU 28LC ใช้กับ ROUTER Vanguard 6520 (ธกส.)
ให้ทำการสลับ PIN V กับ PIN X